Stepping motor and driver

  • G-5-1 Rs485 bus type stepping driver 2LS860R

    G-5-1 Rs485 bus type stepping driver 2LS860R

    Rs485 bus type stepping driver 2LS860R 2LS860R high-performance 485 bus stepping drive, using 32-bit ARM processor, integrated intelligent motion controller function, built-in S-shaped acceleration and deceleration command, can independently set acceleration and deceleration. Real-time control of the drive and motor by running the Modbus protocol over the RS485 network. Debug interface: display parameter settings Maximum current:7.2A Power supply:AC:18V~80VorDC:18V~110V Typical applications: ...
  • G-4-2 57 60 stepping driver2NS556C

    G-4-2 57 60 stepping driver2NS556C

    The Bergerda series of digital stepping drivers, based on a 32-bit DSP platform, utilizes micro-segmentation technology and PID current control algorithm design to provide a full range of performance beyond the ordinary analog stepping drivers. ·PID parameter adjustment function to better meet different types of load applications .Micro-segmentation control algorithm to improve the smoothness of the motor in each speed segment .Comman smoothing function makes the motor acceleration and decele...
  • G-1 closed loop step motor

    G-1 closed loop step motor

    Introduction to closed loop stepping technology 1.Do not lose step Use of photoelectric encoder feedback motor position constitutes a closed-loop stepping drive system; The traditional stepping motor drive system may cause lost step or stall during sudden load, so it is necessary to reserve a large torque margin; and the closed loop stepping driver will collect the current position information every 50us, and according to the position error information adjusts the current, corrects the positi...
  • G-5-1 IO controlled stepping driver 2NS860-IO

    G-5-1 IO controlled stepping driver 2NS860-IO

    IO controlled stepping driver 2NS860-IO In the automation equipment, transportation, transmission, connection and other functions are often used. Originally used more traditional speed motor. Stepping with the IO speed control now is more cost effective. Features : Internal automatic operation in speed control mode , IO control starts and stops , dial code selects running speed, and has two trigger modes. Mode 2 is compatible with the inverter IO mode, IN1 is forward and IN2 is reversed The s...
  • G-4-5 110 130 stepping driver 3NS2280

    G-4-5 110 130 stepping driver 3NS2280

    The Bergerda series of digital stepping drivers, based on a 32-bit DSP platform, utilizes micro-segmentation technology and PID current control algorithm design to provide a full range of performance beyond the ordinary analog stepping drivers. ·PID parameter adjustment function to better meet different types of load applications .Micro-segmentation control algorithm to improve the smoothness of the motor in each speed segment .Comman smoothing function makes the motor acceleration and decele...
  • G-4-3 57 60 Stepping driver 2NS556A

    G-4-3 57 60 Stepping driver 2NS556A

    The Bergerda series of digital stepping drivers, based on a 32-bit DSP platform, utilizes micro-segmentation technology and PID current control algorithm design to provide a full range of performance beyond the ordinary analog stepping drivers. ·PID parameter adjustment function to better meet different types of load applications .Micro-segmentation control algorithm to improve the smoothness of the motor in each speed segment .Comman smoothing function makes the motor acceleration and decele...
  • G-4-4 86 Stepping driver 2NS860H

    G-4-4 86 Stepping driver 2NS860H

    The Bergerda series of digital stepping drivers, based on a 32-bit DSP platform, utilizes micro-segmentation technology and PID current control algorithm design to provide a full range of performance beyond the ordinary analog stepping drivers. ·PID parameter adjustment function to better meet different types of load applications .Micro-segmentation control algorithm to improve the smoothness of the motor in each speed segment .Comman smoothing function makes the motor acceleration and decele...
  • G-4-1 42 stepping driver 2NS422

    G-4-1 42 stepping driver 2NS422

    The Bergerda series of digital stepping drivers, based on a 32-bit DSP platform, utilizes micro-segmentation technology and PID current control algorithm design to provide a full range of performance beyond the ordinary analog stepping drivers. ·PID parameter adjustment function to better meet different types of load applications .Micro-segmentation control algorithm to improve the smoothness of the motor in each speed segment .Comman smoothing function makes the motor acceleration and decele...
  • G-3-4 110-130 series two-phase stepping motor

    G-3-4 110-130 series two-phase stepping motor

    110/130 series two-phase stepping motor General specifications Step accuracy :   ±5%(Whole step、Empty load) Temperature rise:80°C Max Ambient temperature:-10℃-+50℃ Insulation resistance:100MΩmin.500VDC Pressure resistance:500VAC for one minute Radial runout:0.06Max.(450g-load) Axial runout:0.08Max.(450g-load) Stepper motor model Phase Step angle (°) Holding torque (NM) Rated current (A) Phase inductance (mH) Phase resistance (Ohm) Number Rotor inertia (g.cm²) ...
  • G-3-3 86 series two-phase stepping motor

    G-3-3 86 series two-phase stepping motor

    86 series two-phase stepping motor General specifications Step accuracy :   ±5%(Whole step、Empty load) Temperature rise:80°C Max Ambient temperature:-10℃-+50℃ Insulation resistance:100MΩmin.500VDC Pressure resistance:500VAC for one minute Radial runout:0.06Max.(450g-load) Axial runout:0.08Max.(450g-load) Stepper motor model Phase Step angle (°) Holding torque (NM) Rated current (A) Phase inductance (mH) Phase resistance (Ohm) Number Rotor inertia (g.cm²) Shaft...
  • G-3-2 57 series two-phase stepping motor

    G-3-2 57 series two-phase stepping motor

    57 series two-phase stepping motor General specifications Step accuracy :   ±5%(Whole step、Empty load) Temperature rise:80°C Max Ambient temperature:-10℃-+50℃ Insulation resistance:100MΩmin.500VDC Pressure resistance:500VAC for one minute Radial runout:0.06Max.(450g-load) Axial runout:0.08Max.(450g-load) Stepper motor model Phase Step angle (°) Holding torque (NM) Rated current (A) Phase inductance (mH) Phase resistance (Ohm) Number Rotor inertia (g.cm²) Shaf...
  • G-3-1 42 series two-phase stepping motor

    G-3-1 42 series two-phase stepping motor

    42 series two-phase stepping motor General specifications Step accuracy :   ±5%(Whole step、Empty load) Temperature rise:80°C Max Ambient temperature:-10℃-+50℃ Insulation resistance:100MΩmin.500VDC Pressure resistance:500VAC for one minute Radial runout:0.06Max.(450g-load) Axial runout:0.08Max.(450g-load) Stepper motor model Phase Step angle (°) Holding torque (NM) Rated current (A) Phase inductance (mH) Phase resistance (Ohm) Number Rotor inertia (g.cm²) Shaft...
12 Next > >> Page 1 / 2